Product Description
The RTS 810 7-Station System comes complete with a PS15 power supply, 7 belt packs with headsets and cabling. The Beyerdynamic DT108 is a professional, single ear headset, equipped with a dynamic, noise-cancelling microphone attached to a rugged, adjustable swiveling boom. The DT108 headset series is rated at a low 50 ohms, for a higher output, and listening level. The microphone is rated at 200 ohms for high sensitivity and clarity. The adjustable headband is nicely cushioned, and the ear cup provides up to 20 dB of ambient noise attenuation, thereby improving monitoring isolation and clarity. The highly directional microphone features a frequency response optimized for speech intelligibility in noisy environments.
MASTER STATION
- Specifications not available
BELT PACK
Channel Supplied Power Requirements
- 30 VDC nominal (standard RTS line), 65 to 85 mA
Environmental Requirements
- Storage: -20°C to 80°C; 0% to 95% humidity, noncondensing
- Operating: 0°C to 50°C; 0% to 95% humidity, noncondensing
Dimensions
- 5.00″ (127mm) High
- 3.75″ (96.3mm) Wide
- 2.05″ (52.1mm) Deep
Weight
Exterior
- Polystyrene and polycarbonate mix; gray textured main body
Impedance Across Intercom Line
Ambient Temperature Range
- Operating: 0° C to 50° C
- Storage: -40° C to 125° C
Noise Contribution to 200 Intercom Line
Program Input
- Maximum input level: +20 dBu
- Nominal input level: -10 to +8 dBu
- Frequency response: 100 Hz to 12 kHz, ±3 dB
Monaural Dynamic-mic Headset Connector
- XLR-4-31 receptacle (J13)
- Pin 1 – Microphone low
- Pin 2 – Microphone high
- Pin 3 – Common
- Pin 4 – Headphone high
- Stereo Dynamic-mic Headset Connector
- XLR-5-31 receptacle (J14)
- Pin 1 – Microphone low
- Pin 2 – Microphone high
- Pin 3 – Common
- Pin 4 – Headphone left high
- Pin 5 – Headphone right high
Carbon-mic Headset Connector (J1)
- ¼-inch, 3-conductor Phone Jack
- Used for Headset
- Tip – Carbon microphone
- Ring – Headphone
- Sleeve – Common
- Used for Mic Switch
- Tip – Remote switch normal-open contact
- Ring – No connection
- Sleeve – Remote switch common
Intercom Line Input Connector (J11)
- XLR-3-31 female receptacle
- Pin 1 – Common
- Pin 2 – Channel 1 intercom audio and +DC
- Pin 3 – Channel 2 intercom audio
- Line Loop/Aux Connector (J10)
- XLR-3-32 male receptacle
- Used for Loop-through:
- Pin 1 – Common
- Pin 2 – Channel 1 intercom audio and +DC
- Pin 3 – Channel 2 intercom audio
Used for Program Input
- Pin 1 – Common
- Pin 2 – Program input high
- Pin 3 – Program input low
Used for Remote Mic Switch and/or External Power
- Pin 1 – Common
- Pin 2 – +22 to +24 volts DC
- Pin 3 – Remote switch normal-open contact
HEADSET
Type
- Single-Sided Headset with Boom Microphone
Frequency Range
Microphone Type
- Dynamic, Noise-Cancelling
Mic Frequency Response
Impedance
- 50 Ohms (Headset)
- 200 Ohms (Microphone)
Sensitivity (0 VU)
Maximum Input Power
Connectors
Cable Length
Weight
