Shure FP-33 Portable Audio Mixer

Shure FP-33 Mixer Front
Shure FP-33 Mixers AngleShure FP-33 Mixer Angle
$45.00 per day
$135 per week
What You Get
  • Mixer
  • Power Supply
  • Headphones
  • 2 - 25ft XLR Cables
  • Porta Brace Soft Case
  • Carry Strap

Product Description

The FP33 is a 3-input, 2 output, portable stereo mixer specifically designed for remote audio recording, electronic field production, electronic news gathering, and location film production. The FP33 is rugged enough to handle the elements and flexible enough for professional working environments. It is suitable for electronic news gathering (ENG), field production (EFP), film, television, or recording audio for sound design. The FP33 features 3 high quality XLR inputs and stereo (L/R) XLR output. The inputs and outputs can be switched bettween mic and line level signal. There are 3.5mm Monitor and Tape I/O and a choice of either 1/4″ TRS phone or 3.5mm headphone output (both are provided). The FP33 has an exceptionally low self-noise and a wide dynamic range that are perfect for use with DAT and other digital recording media.

  • Mixer
  • Power Supply
  • Headphones
  • 2 - 25ft XLR Cables
  • Porta Brace Soft Case
  • Carry Strap

Inputs

  • 3 – Balanced XLR Inputs

Output

  • 2 – Balanced XLR Outputs

Monitor/Headphone Out

  • 2 – 1/4″ TRS Phone / 3.5mm stereo headphone outputs.

ALT I/O

  • Monitor In 3.5mm jack
  • Tape Output 3.5mm jack

Link Input/Output

  • “MIX BUS” connection: mini 3-Pin XLR connection

Impedance Input

  • Mic – (designed for use with 19 to 600 ohms source) 1k ohm internal, -10 dBV clip level
  • Line – (designed for use with < / – 1k ohms source) 50k ohms internal, +36 dBV clip level
  • Monitor – (designed for use with < / – 1k ohms impedance source) 10k ohms internal, +21 dBV clip level
  • Outputs
  • Mic – (designed for use with Low-Z input source) 1 ohm internal, -31 dBV clip level
  • Line – (designed for use with 600 ohms source) 150 ohms internal, +18 dBm clip level
  • Tape – (designed for use with > 10k ohms source) 2.2k ohms internal, +3 dBV clip level
  • Headphones – (designed for use with 8 to 200 ohms source) 300 ohms internal, +11 dBV clip level

Gain

  • Low-Z Mic Input: Line 78dB, Mic 28dB, Headphone 89dB, Tape 66dB
  • Line: Line 28dB, Mic -22dB, Headphone 39dB, Tape 16dB
  • Monitor: Headphone 11dB

Hum & Noise

  • Output Noise: Master level fully CCW: < / – 100dBV, 20 to 20,000 Hz,Master level fully CW: < / – 80dBV, 20 to 20,000 Hz
  • Equivalent Input Noise: -127 dBV with 150 ohm source, 20 to 20,000 Hz

Frequency Response

  • 20 to 20,000 Hz +/- 2.0 dB (channel controls centered)

Distortion

  • 0.25% THD a +4 dBm output, 50 to 20,000 Hz

Metering

  • VU Left/Right Channel Output Level Meters: 0 VU preset at +4dBm output level

Controls

  • Inner/Outer Ring pots: Master Output Level (L/R) and Headphone Monitor
  • Level Control pots: Input Channels 1-3
  • Pan Control pots: Input Channels 1-3
  • Switches: Power, Mic/Line Level Input & Output, Low-Cut Filter (channels 1-3), 1kHz Oscillator, Link, Output Peak Limiter, Meter Lamp/Battery Check Switch, Monitor Input Switch
  • Buttons: Slate Button

Control Voltage Out

  • No

Phantom Power

  • 12 Volt: through matched 680 ohms
  • 48 Volt: through matched 6.8k ohms
  • 12 Volt T (A-B): through matched 180 ohms

Temperature

  • Operating: 0 to 60 degrees C (32 to 140 degrees F)
  • Storage: -40 to 85 degrees C (-40 to 185 degrees F)

Power

  • Internal: Two 9V alkaline batteries
  • External: 12-30 Vdc to dc In jack; non-polarized
  • Current Drain: Approximately 41mA (idle) at 18 V
  • Battery Life: 8 hours minimum, typical

Dimensions

  • 2.26 x 7.24 x 6.33 (58 x 184 x 161mm) (H x W x D)

Weight

  • 3.5 lbs (1.6 kg)